Overheating MacBook fixed by drilling 60 holes in casing for increased airflow

Overheating MacBook fixed by drilling 60 holes in casing for increased airflow

This is an interesting story from an iFixit programmer who attempted to fix his overheating MacBook Proâ€"an issue that many users haveâ€"by drilling a ring of holes in the MacBook’s body to increase airflow under its fans.

With a 1/16” bit, we drilled holes in the bottom case, under the fans (we figured out where the blades of the fan were exposed based on the dust pattern stuck to the inside of the bottom case). The speed holes worked: The boot chime rang. The screen glowed. The fans blew.

It’s too early to know if the fix will help long term, but initially the holes have decreased temperatures to an average in the 40s and 50s opposed to an average between 80º and 90º C and as high as 100º C before the modification.

The holes came only after trying a number of methods of fixing the dead MacBook, including baking the logic board in an oven, which temporarily provided some relief: “I cracked open the back of my laptop, disconnected all eleven connectors and three heat sinks from the logic board, and turned the oven up to 340º F. I put my $900 part on a cookie sheet and baked it for seven nerveracking minutes… After it cooled, I reapplied thermal paste, put it all back together, and cheered when it booted. It ran great for the next eight months. Temperatures averaged in the 60s and 70s Câ€"although recently, they began creeping up again.”

The full story of how the overheating MacBook Pro was saved is on iFixit’s blog here.

Review: TwelveSouth’s BookBook case for the 15-inch Retina MacBook Pro

BookBook case for iPhone 4 puts your money where your phone is

1. izealot says: Apple’s obsession with ‘clean’ design is the sole reason for the overheating. But I can’t complain, I love the design of all MacBooks!
   
   LikeLike
2. 311sie says: hope it fixes the issue permanently ’cause this is not an elegant solution.
   
   LikeLike
3. AeronPeryton says: In before someone inevitably drills holes into their MacBook while it is still assembled. And then proceeds to sue Apple because of their startling level of stupidity.
   
   LikeLike
4. chrisl84 says: The real question is 60 holes necessary. Could have 6 holes (like for the speaker on the iPhone 6) accomplished the same desired results? Should have done incremental increases to see at how many holes the “hack” became successful.
   
   LikeLike
   • totencough says: Agreed with hole number and hole size. I’m sure they could have been a little more precision with this “hack,” too. Ah well.
     
     LikeLike
5. TechPeeve (@TechPeeve) says: if i overheats, then it is designed to overheat!! Let it break and buy a new one!
   
   LikeLike
   • sardonick says: I see you’ve been talking to the Genius Bar again…..:)
     
     LikeLike
6. Avenged110 says: Oven temp listed in °F, comp temp listed in °C. ಠ_ಠ Just Fahrenheit please.
   I’ve never heard of quite literally baking a logic board to solve overheating.
   
   LikeLike